Product ID:SUNNEN HONING STONES: XHB
MSDS Date:07/04/1989
FSC:3460
NIIN:00-474-8793
MSDS Number: BQMDV

SUNNEN PRODUCTS CO

7910 MANCHESTER AVE
ST LOUIS, MO 63143-2712
US

Emergency Phone: 314-781-2105

Info Phone: 314-781-2105

Preparer: TERRY HELLER

Cage: 58436

SUNNEN PRODUCTS CO

SAINT LOUIS, MO 63143-2712 US

Telephone: 314-781-2100

Cage: 58436

ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 55% MAX

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 5% MAX

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9293

BORON OXIDE

CAS: 1303-86-2

RTECS: ED7900000

Fraction By Weight: 5% MAX

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

CALCIUM OXIDE

CAS: 1305-78-8

RTECS: EW3100000

Fraction By Weight: 5% MAX

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3; 9293

COPPER (AS DUST/MIST)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 5% MAX

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

COPPER (AS FUME)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: -

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 10% MAX

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

FLUORIDES AS FLUORINE (SARA III)

CAS: 7782-41-4

RTECS: LM6475000

Fraction By Weight: 5% MAX

OSHA PEL 0.1 PPM

ACGIH TLV: 1 PPM/2 STEL; 9293

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

SILICON CARBIDE

CAS: 409-21-2

RTECS: VW0450000

Fraction By Weight: 55% MAX

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICA, CRYSTALLINE - FUSED

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 5% MAX

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 5% MAX

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:OPERATIONS SUCH AS ABRADING, MELTING,
WELDING, CUTTING OR PROCESSING IN ANY OTHER FASION MAY PRODUCE
POTENTIALLY HAZARDOUS DUST OR FUMES WHICH ACN BE INHALED, SWALLOWED
OR COME IN CONTACT WITH THE SKI N OR EYES.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:DUSTS OR FUMES MAY CAUSE IRRITATION TO THE
EYES, NOSE, OR THROAT; LEAVE A METALLIC TASTE IN THE MOUTH; RESULT
IN METAL FUME FEVER (FLU-LIKE SYMPTOMS).
Medical Cond Aggravated by Exposure:SYMPTOMS MAY BE ARRGAVATED FOR
SENSITIVE INDIVIDUALS WITH RESPIRATORY CONDITIONS (SUCH AS
EMPHYSEMA). PERSONS WITH LIGHT SKIN, SENSITIVE SKIN OR LARGE
AMOUNTS OF BODY HAIR MAY EXPERIENCE SKIN DISORDER

First Aid:INHALATION-REMOVE TO FRESH AIR. IF NOT BREATHING, BEGIN MOUTH
TO MOUTH RESUSCITATION. SEEK MEDICAL ATTENTION. EYE-REMOVE CONTACT
LENSES & FLUSH EYES WITH WATER TO REMOVE PARTICULATES. SEEK MEDICAL
ATT ENTION TO CHECK FOR POSSIBLE IRRITATION. SKIN-BRUSH OFF EXCESS
DUST. WASH HANDS WITH MILD NON-ABRASIVE SOAP & WATER.
INGESTION-SEEK MEDICAL ATTENTION.

Flash Point:NONFLAMMABLE
Extinguishing Media:MATERIAL IN THE SOLID STATE DOES NOT PRESENT A FIRE
OR EXPLSOION HAZARD.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:DUST HAZARD EXIST UNDER FAVORING
CONDITIONS OF SMALL PARTICLE SIZE. DISPERSION IN AIR & STRONG
IGNITION SOURCE MAY RESULT IN AN EXPLOSION.

Spill Release Procedures:SWEEP UP. AVOID BREATHING DUST.

Handling and Storage Precautions:NO SPECIAL PROCEDURES REQUIRED.
Other Precautions:NONE

Respiratory Protection:IF CONDITIONS OF USE (DRY HONING, CUTTING,
GRINDING, WELDING, BRAZING OR SOLDERING OF STONE) GIVE RISE TO DUST
USE NIOSH APPROVED RESPIRATOR RATED FOR METAL DUST TO MAINTAIN
LEVELS OF DUST BELOW ACGIH AND OSHA LEVELS.
Ventilation:IF CONDITIONS OF USE GIVE RISE TO METAL FUMES USE FORCED
VENTILATION TO MAINTAIN LEVELS BELOW ACGIH AND OSHA TLV/PEL.
Protective Gloves:NOT REQUIRED.
Eye Protection:ALWAYS WEAR APPROVED SAFETY GLASSES.
Other Protective Equipment:NO APPLICABLE INFORMATION FOUND.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
NONE

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>728F,>387C
Spec Gravity:5
Solubility in Water:NOT SOLUBLE
Appearance and Odor:SOLID OBJECT.

Stability Indicator/Materials to Avoid:YES
ACIDS OF ALL TYPES WITH PH<4.0, BASES OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:MATERIAL IS STABLE UNDER NORMAL CONDITIONS
OF TRANSPORT AND STORAGE.
Hazardous Decomposition Products:METAL FUMES IF HEATED. OXIDES OF
SULFUR. OXIDES OF NITROGEN AS OXIDATION PRODUCTS OF CEMENT.

Waste Disposal Methods:USED HONING STONES ARE CLASSIFIED BY TH EPA AS
"SCRAP METAL" AND ARE NOT SUBJECT TO REGULATION. DISPOSE OF IN
ACCORDANCE WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS,
REGULATIONS, RULES, ORDERS & ORD INANCES. REF. 40 CFR 261.6
(A)(3)(IV)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.